| Κατασκευαστής: | Baseus |
| Κωδικός Προϊόντος: | HU-6932172600785 |
| Διαθεσιμότητα: | Διαθέσιμο |
Baseus Electric Bike Smartphone Holder with Integrated Solar Panel 150mAh Black (SUZG010001)
A bicycle phone holder designed to be mounted on the handlebar. Made of high-quality materials, this accessory is designed for smartphones with screen sizes from 4.7 "to 6.7". The gadget has large adjustment possibilities (360-degree rotation) so we can perfectly match it to your needs. The built-in solar panel allows you to charge the holder while cycling, making the holder fully self-sufficient.
Specification
Solid mount on the handlebar
The handle is attached to the steering wheel with a solid fastening ring. Silicone inserts optimally protect the gadget against loss of grip, e.g. when driving over bumps.
Perfect match
The gadget has been designed in such a way as to fit the most popular smartphone models of various brands, including Apple, Huawei and Samsung. It is compatible with devices whose screen size is from 4.7 "to 6.7". Electronic adjustment of the arm allows for very precise positioning of the phone in the holder (even if it is in a case).
After attaching the handle to the handlebar, you can freely configure its position. It is important that you have excellent visibility while driving and that you can comfortably observe the device screen - almost without taking your eyes off the street. Twist and change settings 360 degrees.
Perfect setting
For the best visibility, you can maneuver the handle within a very wide range. Forward and backward adjustment is 90 degrees, and right and left as much as 360 degrees. To set the right angle, you will use the knob on the back of the structure, which is accessible with one hand.
Once you've got the perfect alignment, you can lock the mount and smartphone by tightening the side knob. It is well felt on the casing and is easy to maneuver.
Shockproof protection
The smartphone placed in the holder is very well protected against shocks. It does not move and does not fall out. This is due to the soft elements made of polymer rubber that do not scratch the phone casing and absorb sudden movements.
Easy to install
No tool is needed to mount the handlebar to the handlebar. You can install it in two steps:
1. Open the clamp arms and place the handlebar cross tube between them.
2. Close and tighten the rear retaining ring.
Placing and removing the phone from the holder is also not a problem - the holder automatically detects the phone placed on it. To remove the phone from the holder, press the button on the back wall of the holder.
On a cloudy day
If you do not want to risk the inability to charge the holder due to unfavorable weather conditions, you should disassemble the holder and connect it to the charger via the built-in USB Type C port.
